Basic cylinder head inspection after cylinder head removal. This is to check to see if you have a leaking valves.
If your checking the intake valves, tilt your head sideways facing intake manifold studs up. Pour water on each intake hole then check to see if water is leaking out the valves. Do thesame procedure to the other valves.
As simple as that.
If your checking the intake valves, tilt your head sideways facing intake manifold studs up. Pour water on each intake hole then check to see if water is leaking out the valves. Do thesame procedure to the other valves.
As simple as that.
No comments:
Post a Comment